How to Change Kitchen Faucet Cartridge

How to Change Kitchen Faucet Cartridge



Measure the length of the handle

If you don't know how to change kitchen faucet cartridge, you can learn how to do it yourself in this article. This step-by-step guide will teach you how to replace your cartridge and save you a lot of money. Before beginning, it is helpful to measure the length of the handle. You can cut the piece of plywood to fit through the door opening. Once inside the faucet, push the sheet down with pliers. Now, place the retainer clip back into the valve body. You may need to twist the tabs to fully seat the clip. To do this, you can use a white plastic tool.

The new cartridge should fit into the valve. It should line up with the valve seat's notches. To install it, make sure to align the ears of the new cartridge with the tabs on the valve body. Next, you should replace the handle. It is important to use the same screws to secure the handle and the collar. If you don't know how to screw these parts back together, you can use a flat-blade screwdriver.



Remove the handle

The first step to replace the nivito cartridge is to remove the handle. You may need to use a pair of pliers to lift it. You should also be able to find the stem using an online tool called Stem Finder. Afterwards, you should clean the body of the faucet to remove mineral deposits. The last step is to apply a silicone grease on the retaining clip and replace it with the new cartridge.

Remove the brass nut

Taking out the old cartridge is as simple as removing a single screw. To do this, you should unscrew the large nut on the handle and loosen the cartridge. Once you've removed the handle, you should be able to loosen the small metal clip that holds the cartridge in place. Then, remove the brass nut and reinstall the handle. To install the new cartridge, repeat the previous steps.



Then, turn the faucet handle counter-clockwise and unscrew the nut. Then, use a new cartridge. The new cartridge should fit in the same way. The nut on the handle can be replaced with a new one. If it doesn't fit, you can try tightening the screws and inserting a new one. Then, replace the handles and the knob. Then, you're ready to install the new cartridge.

If the cartridge is stuck, you need to remove it. To do this, you can use a plastic tool to pry the stem of the cartridge. Then, you need to grasp the stem of the cartridge with pliers. Then, you'll need to pull the cartridge out of the body of the faucet. Then, replace the new faucet with the new one. To avoid a leak, you need to change the seals first.